Hse corner official

Hse corner official Building a cummunity of safety conscious HSE tips training and insight for everyone.

30/07/2026

🛡️ Oxy-fuel safety is not optional! Understanding your equipment is the first step to staying safe.
Many welders use Non-Return Valves (NRV) and Flashback Arrestors (FBA) interchangeably, but their jobs are completely different. Using only an NRV can leave you vulnerable to a serious, high-pressure explosion.
Here’s the step-by-step breakdown of what each one does to keep you safe:
What Happens in an NRV (Left side of video):
1️⃣ Gas Flow: Normal flow travels up from the Inlet Port.
2️⃣ Non-Return: If gas tries to flow backwards, the Pressure Seat and Internal Valve slam closed, stopping backflow.
3️⃣ Backfire: NRV only stops backflow of gases. It does not stop a flame front.
What Happens in an FBA (Right side of video):
1️⃣ Inlet: Flow enters the Gas Chamber.
2️⃣ Double Check: The Non-return mechanism stops backflow.
3️⃣ Flame Quench: If a flame front occurs, the Multi-layer Sintered Filter (copper mesh) quenches the flame by absorbing the heat and stopping its path.
4️⃣ Secondary Filter: The Gray mesh provides another layer of flame prevention.
Remember: One stops only gas; the other stops gas and flames. Never use oxy-fuel equipment without an approved FBA!
📥 Want a high-quality copy of this safety comparison diagram?
👉 follow dm HSE CORNER OFFICIAL
👉 follow dm HSE CORNER OFFICIAL
Related Hashtags

29/07/2026

Shield up, safety first! 🛡️ Before you strike an arc, you MUST verify your entire setup. This 9-Point Attentive Safety Check isn’t just best practice—it’s your protection.
Don’t risk a setback; follow this simple process for every weld:
Serial Wise Step-by-Step Breakdown:
1️⃣ Step 1: Check your Gas Cylinders. Confirm the test dates, verify the green (Oxygen) and red (Fuel Gas) labels, and ensure the valve cap is fitted during transport.
2️⃣ Step 2: Inspect Pressure Regulators. Use the correct regulator for your gas type and confirm all gauges are functioning correctly with zero leaks.
3️⃣ Step 3: Route your Hoses Properly. Keep them away from sharp edges and hot surfaces. Use red for fuel, blue/green for oxygen, and ensure no cuts or bulges are visible.
4️⃣ Step 4: Use Flashback Arrestors. They MUST be installed on both the oxygen and fuel lines.
5️⃣ Step 5: Clean your Torch and Nozzle. A clear nozzle and functioning valves are non-negotiable.
6️⃣ Step 6: Conduct a Leak Test. A simple soap solution is your best friend. Never, ever use a flame to detect leaks.
7️⃣ Step 7: Prepare the Work Area. Have an extinguisher ready, maintain adequate ventilation, and arrange a fire watch if required.
8️⃣ Step 8: Don proper PPE. We wear the correct safety shoes, flame-resistant clothing, gloves, and face shield—every time.
9️⃣ Step 9: Run an Operational Check. Confirm gas pressures are correct, get a stable flame, and check that valves close properly.
Like this safety guide? Give it a ❤️!
👉 Follow dm HSE CORNER OFFICIAL for more essential HSE resources and expert legal compliance tips.
👉 Follow dm HSE CORNER OFFICIAL to download your own high-resolution safety register guide!
Related Hashtags:

27/07/2026

✅ CO₂ Fire Extinguisher Inspection Steps:

1️⃣ Check Extinguisher Location
✔️ Easily accessible area mein installed hai ya nahi
✔️ Proper signage available hai ya nahi

2️⃣ Verify Cylinder Condition
✔️ Cylinder body par damage, corrosion, leakage check karein
✔️ Paint condition inspect karein

3️⃣ Check Pressure / Weight
✔️ CO₂ extinguisher mein pressure gauge nahi hota
✔️ Cylinder weight check karke CO₂ quantity verify karein

4️⃣ Inspect Safety Pin & Seal
✔️ Safety pin properly installed ho
✔️ Tamper seal broken nahi hona chahiye

5️⃣ Check Hose & Discharge Horn
✔️ Hose crack-free ho
✔️ Discharge horn blockage free ho

6️⃣ Check Inspection Tag
✔️ Monthly inspection record updated ho
✔️ Hydro test & service date verify karein

7️⃣ Ensure Proper Condition
✔️ No leakage
✔️ No obstruction
✔️ Ready for emergency use

🔥 Remember: An inspected extinguisher is a prepared extinguisher.

❤️ Like | Follow | DM HSE CORNER OFFICIAL for HSE & Safety Content

27/07/2026

📋 Serial-Wise Step-by-Step Statutory Compliance Guide:
1️⃣ Quarter 1 (Jan-Mar): Kickstart the year with your Safety Relief Valve Testing and Fire NOC Renewal. Don’t wait until the last minute!
2️⃣ Biannual Checks (Every 6 Months): Schedule your Forklift & Lifting Tools Inspections, Hoist & Crane Inspections, and Air Receiver Hydrotests. Consistency is key.
3️⃣ Annual Reviews (Yearly): Conduct your mandatory Pressure Vessel Inspections, On-Site Emergency Plan Reviews, and the big one—the Safety Audit.
4️⃣ Specifics: Ensure your LPG Pressure Vessel Inspections follow the Peso schedule (5-10 years) and run regular Mock Drills to keep everyone sharp.
💡 Want a high-resolution copy of this 2026 Legal Compliance Calendar for your office?
👉 like this video!
👉 follow our page HSE CORNER OFFICIAL
👉 dm us the word “CALENDAR” and we’ll send the PDF straight to your inbox! 📥
Don’t risk your team’s safety or your business’s reputation. Get compliant today!
Related Hashtags:

27/07/2026

1️⃣ Step 1: Hydrate & Monitor – Drink water continuously and check your urine color regularly. Dark urine means you are already dehydrated.
2️⃣ Step 2: Know the Signs – Learn to identify and treat heat-related illnesses (dizziness, nausea, heavy sweating) before they become emergencies.
3️⃣ Step 3: Eat Balanced Meals – Consume regular, well-balanced meals to keep your stamina and nutrient levels steady.
4️⃣ Step 4: Avoid Canned Beverages – Skip sugary, highly processed canned sodas and energy drinks that can dehydrate you faster.
5️⃣ Step 5: Use the Buddy System – Watch your coworker’s back. Look out for signs of heat exhaustion in each other.
6️⃣ Step 6: Acclimatize Gradually – Slowly increase your workload and exposure to heat so your body builds tolerance over time.
7️⃣ Step 7: Know the Flags – Stay aware of your site’s colored TWL (Thermal Work Limit) flag system and follow the corresponding guidelines strictly.
8️⃣ Step 8: Prioritize Rest & Sleep – Take full advantage of designated break times and get plenty of rest at night to allow your body to recover.
9️⃣ Step 9: Take Electrolytes – Supplement your water intake with electrolytes exactly as instructed by site safety supervisors.
🔟 Step 10: Follow Mid-Day Break Rules – Conform to mandatory mid-day break policies to stay out of high-intensity peak heat hours.
📥 Want the full high-resolution PDF safety poster to pin up at your job site?
👉 like this post
👉 follow our page
👉 dm HSE CORNER OFFICIAL
We’ll send the resource straight to your inbox! Keep your workplace safe and compliant. 🛠️👷‍♂️
Related Hashtags

26/07/2026

Can you use a Fire Extinguisher in under 10 seconds? Most people can’t. Learn the PASS Method before it’s too late! 🔥🧯

PASS Method (Step-by-Step):

✅ P - Pull the safety pin.
✅ A - Aim the nozzle at the base of the fire.
✅ S - Squeeze the handle slowly and firmly.
✅ S - Sweep from side to side until the fire is completely out.

⚠️ Remember:
• Use the correct type of extinguisher for the fire.
• Keep an exit behind you.
• If the fire grows or spreads, evacuate immediately and call emergency services.

💬 Safety knowledge saves lives. Share this reel with your team.

❤️ Like | 💾 Save | 📤 Share | 📩 DM for HSE support
👉 Follow HSE CORNER OFFICIAL for daily Safety Tips & HSE Content.

24/07/2026

Serial Wise Step-by-Step Breakdown:
1️⃣ Step 1: Check your Gas Cylinders. Confirm the test dates, verify the green (Oxygen) and red (Fuel Gas) labels, and ensure the valve cap is fitted during transport.
2️⃣ Step 2: Inspect Pressure Regulators. Use the correct regulator for your gas type and confirm all gauges are functioning correctly with zero leaks.
3️⃣ Step 3: Route your Hoses Properly. Keep them away from sharp edges and hot surfaces. Use red for fuel, blue/green for oxygen, and ensure no cuts or bulges are visible.
4️⃣ Step 4: Use Flashback Arrestors. They MUST be installed on both the oxygen and fuel lines.
5️⃣ Step 5: Clean your Torch and Nozzle. A clear nozzle and functioning valves are non-negotiable.
6️⃣ Step 6: Conduct a Leak Test. A simple soap solution is your best friend. Never, ever use a flame to detect leaks.
7️⃣ Step 7: Prepare the Work Area. Have an extinguisher ready, maintain adequate ventilation, and arrange a fire watch if required.
8️⃣ Step 8: Don proper PPE. We wear the correct safety shoes, flame-resistant clothing, gloves, and face shield—every time.
9️⃣ Step 9: Run an Operational Check. Confirm gas pressures are correct, get a stable flame, and check that valves close properly.
Like this safety guide? Give it a ❤️!
👉 Follow dm HSE CORNER OFFICIAL for more essential HSE resources and expert legal compliance tips.
👉 Follow dm HSE CORNER OFFICIAL to download your own high-resolution safety register guide!
Related Hashtags:

Address

Al Rashidya
Al Ajman

Telephone

+918507571819

Website

Alerts

Be the first to know and let us send you an email when Hse corner official posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Practice

Send a message to Hse corner official:

Shortcuts

Share

Category