Ebajarr.com

23/01/2026

07/08/2025

https://www.ebajarr.com/product/vcomin-fetal-doppler-fetal-ultrasound/

The Vcomin Fetal Doppler is a handheld, portable ultrasound device designed to detect and monitor the fetal heartbeat during pregnancy. Using safe and non-invasive ultrasound technology, it enables healthcare professionals and expectant mothers to listen to the baby’s heart sounds starting from as early as 8 to 12 weeks of gestation. The device features a clear digital display showing the fetal heart rate and delivers high-quality audio through built-in speakers or headphones. Its lightweight design and easy-to-use interface make it ideal for use both in clinical settings and at home, providing reassurance and important health information throughout the pregnancy journey.

Key Features:

Early Detection: Can detect fetal heartbeat from around 8 to 12 weeks of pregnancy.
Portable & Lightweight: Easy to carry and use anywhere—clinic or home.
Clear Digital Display: Shows real-time fetal heart rate (FHR) in beats per minute.
High-Quality Audio: Built-in speaker plus headphone jack for private listening.
User-Friendly Operation: Simple one-button start for quick and easy use.
Safe Ultrasound Technology: Non-invasive and safe for both mother and fetus.
Low Power Consumption: Long battery life for extended use.
Probe Compatibility: Comes with a high-sensitivity ultrasound probe for accurate detection.
Audio Recording (Optional): Some models support recording heartbeat sounds for playback or sharing.
Durable Design: Made with sturdy materials suitable for repeated use.

How to Use Vcomin Fetal Doppler Prepare the Device:

Make sure the device has fully charged batteries or fresh batteries installed.
Turn on the Doppler using the power button.

Apply Ultrasound Gel:
Apply a generous amount of ultrasound gel on the probe or directly on the lower abdomen of the pregnant woman.
The gel helps improve sound conduction for clearer heartbeat detection.

Position the Probe:
Place the probe gently on the abdomen where the fetus is likely located.
Usually, start near the p***c bone and slowly move upward or side to side if you don’t detect a heartbeat right away.

Listen for the Heartbeat:
After a few seconds, you should hear the fetal heartbeat through the built-in speaker or connected headphones.
The heart rate will also display on the screen in beats per minute (BPM).

Adjust Position if Needed:
Move the probe slowly and adjust the angle to get the clearest heartbeat sound.
It may take some patience, especially in early pregnancy or if the baby is moving.

Record or Note the Heart Rate:
If your device supports it, you can record the heartbeat sound.
Otherwise, note the displayed heart rate for your records.

Turn Off the Device:
After use, clean the probe with a soft cloth and medical disinfectant.
Turn off the Doppler to save battery.

Care Tips for Vcomin Fetal Doppler:

Clean the Probe After Each Use:
Wipe the ultrasound probe gently with a soft cloth dampened with a mild disinfectant or alcohol swab. Avoid harsh chemicals that might damage the probe surface.

Use Ultrasound Gel Properly:
Only use the recommended ultrasound gel during operation. After use, clean off any residual gel from the probe and device surface to prevent buildup.

Store Properly:
Keep the Doppler device and probe in a clean, dry place away from direct sunlight, dust, and moisture.

Avoid Dropping or Impact:
Handle the device carefully to prevent damage from falls or strong impacts.

Battery Maintenance:
Remove batteries if the device won’t be used for a long period to avoid battery leakage. Recharge rechargeable batteries as per the manufacturer’s instructions.

Check Cables and Connectors:
Regularly inspect cables and connectors for any signs of wear or damage and replace them if necessary.

Follow Manufacturer’s Instructions:
Always adhere to the specific care guidelines provided in the user manual to ensure safety and device longevity.

Benefits:

Early Monitoring: Allows detection of the fetal heartbeat as early as 8 to 12 weeks, giving early reassurance about fetal health.
Non-Invasive and Safe: Uses ultrasound technology that is safe for both mother and baby with no harmful radiation.
Portable and Convenient: Lightweight and easy to carry, enabling frequent monitoring at home or in clinics.
Emotional Comfort: Helps expectant mothers and families bond with the baby by hearing the heartbeat.
Quick and Easy Use: Simple operation means healthcare providers and even parents can use it without extensive training.
Real-Time Feedback: Provides immediate fetal heart rate information for early detection of potential complications.
Cost-Effective: Reduces the need for frequent hospital visits for routine heartbeat checks.
Supports Prenatal Care: Enhances routine prenatal checkups by providing additional fetal health data.

7,500.00৳ Original price was: 7,500.00৳ .6,300.00৳ Current price is: 6,300.00৳ .

Vcomin Fetal Doppler Fetal Ultrasound quantity
1

07/08/2025

https://www.ebajarr.com/product/saline-stand-with-wheel-description/
A Saline Stand with Wheel is a mobile IV fluid stand used to hold and suspend saline bottles or IV bags for patient treatment. It is typically made of stainless steel or chrome-plated metal for durability and hygiene. The stand features an adjustable-height pole, multiple hooks, and a stable base with smooth-rolling caster wheels for easy mobility between patient beds in hospitals, clinics, or home care settings. Designed for stability and convenience, it ensures safe and efficient delivery of fluids and medications to patients.

Key Features of Saline Stand with Wheel

Height Adjustable Pole – Allows easy height customization for patient comfort.
Durable Construction – Made from stainless steel or chrome-plated metal for long life and rust resistance.
Stable Base Design – Wide or weighted base to prevent tipping.
Smooth Mobility – Fitted with caster wheels for effortless movement.
Multiple Hooks – 2–4 hooks for holding saline bottles or IV bags.
Easy to Clean – Smooth, non-rusting surface for hygienic maintenance.

How to Use a Saline Stand with Wheel:

Adjust the Height – Loosen the height adjustment k**b, set the pole to the required height, and tighten it securely.
Hang the Saline Bottle/IV Bag – Place the bottle or bag onto one of the hooks at the top of the stand.
Position Near Patient – Roll the stand close to the patient’s bed or chair, ensuring the IV tubing reaches comfortably.
Connect the IV Line – Attach the IV tubing to the patient’s cannula as per medical instructions.
Lock the Wheels (if available) – Engage the wheel locks to prevent the stand from moving during use.
Monitor & Adjust – Check fluid flow regularly and adjust height if needed.

Care Tips for Saline Stand with Wheel:

Clean Regularly – Wipe the pole, hooks, and base with disinfectant after each use.
Inspect Before Use – Check for loose screws, hooks, or damaged parts.
Maintain Wheels – Remove dust, hair, or debris from caster wheels to ensure smooth movement.
Avoid Overloading – Do not hang more bottles or bags than the stand’s capacity.
Store Safely – Keep in a dry, clean place when not in use to prevent rust or contamination.
Tighten Fittings – Regularly check and secure adjustment k**bs and joints.

07/08/2025

https://www.ebajarr.com/product/ambu-bag/

Description:
An Ambu Bag, also known as a Bag Valve Mask (BVM), is a handheld, manual resuscitation device used to assist or replace spontaneous breathing in patients who are unable to breathe adequately on their own. It consists of a self-inflating bag connected to a face mask and a one-way valve system. When the bag is squeezed, it pushes air or oxygen into the patient’s lungs through the mask. The device is commonly used in emergency medical situations, during anesthesia, and in intensive care units to provide ventilation support until more advanced airway management can be established.

Key Features of Ambu Bag:
Self-inflating bag: Automatically refills with air after each compression, ready for the next breath.

One-way valve system: Ensures that exhaled air does not re-enter the bag, preventing contamination.

Soft, clear face mask: Provides a secure and comfortable seal over the patient’s nose and mouth.

Oxygen inlet port: Allows attachment to an external oxygen source for delivering higher oxygen concentration.

Multiple sizes available: Designed for use on infants, children, and adults.

Lightweight and portable: Easy to carry and use in emergency and field situations.

Durable and reusable: Made from medical-grade materials that can be cleaned and disinfected.

Transparent housing: Allows visual inspection of the valve and patient’s exhaled breath.

Ergonomic design: Facilitates ease of use with one hand or two hands during resuscitation.

How to Use an Ambu Bag:
Prepare the patient:

Lay the patient flat on their back.

Open the airway using the head tilt-chin lift maneuver (unless spinal injury is suspected).

Position the mask:

Place the mask over the patient’s nose and mouth.

Ensure a tight seal by pressing the mask firmly against the face with your thumb and fingers (using the “C-E” grip: thumb and index finger form a “C” around the mask, other fingers lift the jaw forming an “E”).

Ventilate:

Squeeze the bag steadily and slowly with one hand to deliver a breath.

Watch for the patient’s chest to rise, which indicates proper ventilation.

Release the bag to allow it to self-inflate and draw in air or oxygen.

Maintain rhythm:

Provide breaths at the appropriate rate:

Adults: 10-12 breaths per minute (one breath every 5-6 seconds).

Children and infants: 12-20 breaths per minute.

Monitor:

Continuously observe the chest for adequate rise and fall.

Check for signs of effective ventilation like improved color and pulse.

Adjust as needed:

If chest does not rise, reposition the mask or airway.

Ensure the bag is not squeezed too fast or too hard to avoid lung injury.

Benefits of Ambu Bag:
Provides immediate ventilation support: Helps patients who are not breathing or breathing inadequately to get oxygen quickly.

Simple and quick to use: Can be operated by trained healthcare providers and emergency responders without complex equipment.

Portable and lightweight: Easy to carry and use in a variety of settings, including ambulances, hospitals, and remote locations.

No need for electricity: Functions manually, making it reliable during power outages or in field emergencies.

Allows oxygen enrichment: Can be connected to an oxygen supply to increase the concentration of delivered oxygen.

Versatile sizes: Suitable for use on newborns, children, and adults.

Reusable and durable: Made from medical-grade materials that can be sterilized and reused, making it cost-effective.

Life-saving device: Critical for resuscitation during cardiac arrest, respiratory failure, or trauma situations.

Enhances airway management: Can be used as a bridge until advanced airway techniques (like intubation) are performed.

3,700.00৳ Original price was: 3,700.00৳ .2,700.00৳

07/08/2025

https://www.ebajarr.com/product/beurer-hearing-amplifier-ha-50/

📘 Description:
The Beurer HA 50 Hearing Amplifier is a compact, lightweight device that helps individuals with mild to moderate hearing loss by amplifying surrounding sounds. Designed for comfort and discretion, it can be worn on either ear and features an adjustable volume control for personalized hearing assistance. Its ergonomic build ensures a secure fit, making it suitable for everyday use in conversations, watching TV, or attending events.

🔧 Key Features:

Amplification up to 40 dB for clearer hearing.

Compact and ergonomic design for discreet, comfortable wear.

Adjustable volume control for personalized sound levels.

Low background noise for better sound quality.

Suitable for left or right ear use.

Lightweight construction for extended daily wear.

Powered by a standard button cell battery.

⚙️ How to Use (Beurer HA 50 Hearing Amplifier):

Insert the battery into the device following the polarity markings.

Place the amplifier over your ear, ensuring the earpiece fits comfortably in your ear canal.

Switch the device ON using the power control.

Adjust the volume gradually until you reach a comfortable hearing level.

Use in situations where you need sound amplification, such as conversations, TV watching, or public events.

Turn OFF the device when not in use to save battery life.

Safety and Care for Beurer HA 50 Hearing Amplifier:

Keep the device dry—avoid exposure to water, sweat, or humidity to prevent damage.

Store in a cool, dry place when not in use, away from direct sunlight or heat sources.

Clean the earpiece regularly with a soft, dry cloth to remove earwax and dirt.

Do not use harsh chemicals or water to clean the device.

Replace batteries promptly to avoid leakage that can damage the device.

Remove the battery if you won’t use the amplifier for an extended period.

Consult a hearing specialist if you experience discomfort, pain, or worsening hearing issues.

Do not share the device to maintain hygiene and prevent ear infections.

Benefits of Beurer HA 50 Hearing Amplifier:

Enhances hearing clarity for people with mild to moderate hearing loss.

Improves communication in everyday situations like conversations and watching TV.

Lightweight and comfortable for extended, discreet wear.

Easy to operate with simple volume control.

Cost-effective alternative to professional hearing aids.

Helps increase confidence and social interaction by reducing hearing difficulties.

Suitable for both left and right ear use.

1,200.00৳ Original price was: 1,200.00৳ .950.00৳

07/08/2025

https://www.ebajarr.com/product/beurer-hearing-amplifier-ha-50/

07/08/2025

https://www.ebajarr.com/wp-content/uploads/2025/08/download-2025-08-07T111104.670-fotor-enhance-20250807111150.jpg
The Star Dental X-ray system combines high-quality dental X-ray film with a monobath solution that simplifies and accelerates the image development process. This analog radiographic kit is designed for intraoral use and provides excellent image clarity, high contrast, and minimal radiation exposure. With a self-developing solution, dental professionals can process films quickly and conveniently without separate developer and fixer chemicals or complex equipment.

The films are D-speed, double-emulsion type, and come in soft plastic packets for added patient comfort. Ideal for routine dental diagnostics such as detecting cavities, root conditions, and periodontal issues.

🧰 How to Use Star Dental X-ray Film + Monobath Kit
📸 1. Prepare the Patient
Explain the procedure to the patient.

Position them comfortably.

Ask them to remain still during the X-ray.

📦 2. Insert the Film
Take one Star Dental X-ray film from the box.

Identify the convex dot on the packet – this side should face the X-ray source.

Place the film inside the patient’s mouth at the required position (bitewing, periapical, etc.).

⚡ 3. Take the X-ray
Adjust the dental X-ray machine.

Align it correctly with the film inside the mouth.

Take the X-ray as per standard radiographic exposure time (based on machine settings and patient size).

🧪 4. Develop the Film Using Monobath
Remove the exposed film from the mouth and open the packet.

In a darkroom or under a safelight, immerse the film into the monobath solution.

Gently agitate for around 2–3 minutes at 22°C (72°F). Follow the specific time/temp chart if provided.

🚿 5. Rinse and Dry
Rinse the film under clean running water for 30–60 seconds.

Let the film air-dry or use a drying cabinet if available.

🔍 6. Read and Interpret
Once dry, the film will show a clear, high-contrast image ready for diagnosis.

⚠️ Important Tips:
Always use clean monobath solution; discard if it becomes cloudy.

Maintain recommended room temperature; too hot or too cold affects image quality.

Use gloves while handling films to avoid contamination.

✅ Benefits of Star Dental X-ray Film + Monobath
🕒 Fast & Easy Processing

Monobath developer combines developing and fixing in one step — no need for multiple chemicals or machines.

💡 High-Quality Images

Produces sharp, high-contrast radiographic images ideal for accurate diagnosis.

🧴 Space & Cost Saving

No need for a full darkroom setup or separate developer/fixer chemicals.

📉 Reduced Radiation Exposure

D-speed high-sensitivity film requires less radiation compared to traditional systems.

😊 Comfortable for Patients

Soft, flexible plastic film packets reduce discomfort during intraoral placement.

🛠️ Convenient for Clinics

Quick turnaround helps clinics handle more patients efficiently.

🧼 Easy to Handle & Store

Long shelf-life and compact packaging make it simple to stock and manage.

💧 Minimal Water Use

Only a short rinse is needed after development, saving water.

4,000.00৳ Original price was: 4,000.00৳ .3,000.00৳