23/06/2026
🔑 BMW BDC2/BDC3 and VAG 5C/5D key programming — now included with AVDI.
NCF key programming is now part of the essential AVDI software, available free of charge for AVDI owners with an active Annual Subscription (AMS) and an RH850 Programmer.
This brings support for NCF keys used in selected modern:
✅ BMW vehicles with BDC2 / BDC3
✅ Audi vehicles with IMMO 5C / 5D
✅ Volkswagen vehicles with IMMO 5C / 5D
✅ Škoda vehicles with IMMO 5C / 5D
✅ Porsche vehicles with NCF key applications
Relevant applications include selected BMW G-Series / F-Series BDC2-BDC3 vehicles, supported VW Group 5C/5D systems, and Porsche Macan NCF key applications.
What you get:
🔸 Spare key preparation and programming
🔸 Dealer key preparation using OEM keys and RH850
🔸 Aftermarket key preparation for VAG and Porsche using PROTAG
🔸 No additional software licence required
For BMW, the prepared key starts the vehicle directly — no additional key learning procedure is required.
For VAG and Porsche, the prepared key is learned to the vehicle via the standard OBD key programming procedure.
⚠️ Please note: the CB503 cable is required for reading and writing key data on bench.
📩 Contact us to check compatibility, required equipment and availability.
