M R Dimashkieh Gauged Diamonds

  • Home
  • M R Dimashkieh Gauged Diamonds

M R Dimashkieh Gauged Diamonds Predictable uniform thickness Veneers/Crown margin preparation
Box contain two sizes 0.5 - 0.7 mm (20$)

The efficacy of conventional diamond cutting instruments when used with high or low speed handpieces as compared to the Mohiddin R. Dimashkieh (MRD) rotary cutting instruments are reviewed. Conventional instruments may produce inaccurate finish lines or may remove more tooth structure than required and traumatize the gingival tissue due to doubtful running handpiece and operator’s ill judgment that half of the diameter of the conventional bur is outside the contour of the tooth during preparation. On the other hand the use of MRD instruments, with its depth stop tip and safe end will ensure that only half of the instrument will be embedded in the tooth, giving control of adequate and uniform tooth reduction and gingival safety.

إن الطريقة الشائعة في السيطرة على تحديد مقدار قطع النسج السنية لتحضير شبه الكتف هو استعمال سنبلة ماسية مخروطية ذات نهاية دائرية. يجب أن لا يتجاوز عمق شبه الكتف منتصف عرض رأس السنبلة المخروطية ذات النهاية الدائرية، وإلا فإنه يمكن إحداث شفة مينائية غير مدعومة. وإن دقة خط الإنهاء تعتمد على استعمال سنابل ماسية بمواصفات عالية و قبضة دوران مركزي و فحص متكرر أثناء التحضير للتأكد من أن نصف رأس السنبلة خارج حدود السن المحضر. وإن القياس الدقيق لعرض و شكل خط الإنهاء المحضر حول سطح السن بالكامل أمر شاق و صعب و لكن مرغوب به و استعمال السنابل التقليدية السابقة الذكر لا يؤمن الدقة المطلوبة في تحديد خط الإنهاء لذلك فإن استعمال السنبلة المعدلة و المصممة من قبل أ.د محي الدين رضا دمشقية و التي تحتوي على نهاية ملساء يمكنها أن تحدد بسهولة عمق التحضير و مقدار القطع و شكله و تساعد على توفير النسج مع اعطاء خط الإنهاء المرغوب به بدقة. و من ميزات هذه السنبلة أيضاً انها لا تسمح بحدوث الأخطاء الشائعة أثناءالتحضير من إزالة كمية كبيرة أو غير كافية من النسج السنية أثناء تحضير تاج السن.

الحمدلله الذي بنعمته تتم الصالحات.. Multidisciplinary dental mirror handle ...
28/12/2016

الحمدلله الذي بنعمته تتم الصالحات..
Multidisciplinary dental mirror handle
#الرياض #التحلية

Always remember to keep the guiding pin Sub or Supra-Gingival and Never on the gingivaPredictable uniform thickness fini...
21/05/2016

Always remember to keep the guiding pin Sub or Supra-Gingival and Never on the gingiva
Predictable uniform thickness finish line using M R Dimashkieh gauged diamonds

1- It is recommended for all ceramic and CAD/CAM systems preparation.2- Reduces the risk of hard tissue damage during pr...
27/04/2016

1- It is recommended for all ceramic and CAD/CAM systems preparation.
2- Reduces the risk of hard tissue damage during prep.

(Boening, K. W., Kaestner, K. I., Luthardt, R. G., & Walter, M. H. (2001). Burs with guide pins for standardized tooth preparation. Quintessence International, 32(3).

The original Design By Prof. Dimashkieh In 1993(Dimashkieh, M. R. (1993). Modified rotary design instruments for control...
19/04/2016

The original Design By Prof. Dimashkieh In 1993

(Dimashkieh, M. R. (1993). Modified rotary design instruments for controlled finish line crown preparation. The Journal of prosthetic dentistry, 69(1), 120-121).

Start with guiding pin supra gingival then sub gingival (Never On Gingiva)
18/04/2016

Start with guiding pin supra gingival then sub gingival (Never On Gingiva)

If the eye can't see it then you should feel it
12/04/2016

If the eye can't see it then you should feel it

Self limiting bur under Microscope
Never been more accurate

Self limiting bur under MicroscopeNever been more accurate
11/04/2016

Self limiting bur under Microscope
Never been more accurate

Predictable uniform thickness finish line using M R Dimashkieh gauged diamonds
05/04/2016

Predictable uniform thickness finish line using M R Dimashkieh gauged diamonds

This is how you can do it

Predictable uniform thickness finish line

This is how you can do itPredictable uniform thickness finish line
05/04/2016

This is how you can do it

Predictable uniform thickness finish line

It is not a Statement it is a Promise Predictable uniform thickness margin preparation
31/03/2016

It is not a Statement it is a Promise

Predictable uniform thickness margin preparation

1. Unique design2. High quality diamonds3. Long life ( Use up to 30 times )
25/03/2016

1. Unique design

2. High quality diamonds

3. Long life ( Use up to 30 times )

1. Try it first on Dentoform Model like any other dental device or instrument.2. Gentle pressure required during prepara...
24/03/2016

1. Try it first on Dentoform Model like any other dental device or instrument.

2. Gentle pressure required during preparation.

3. Fast and easy to master.

Address


Website

Alerts

Be the first to know and let us send you an email when M R Dimashkieh Gauged Diamonds posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

  • Want your practice to be the top-listed Clinic?

Share