21/07/2026
Biological Safety Cabinets Explained
Biological Safety Cabinets (BSCs) are ventilated laboratory enclosures designed to protect personnel, the environment, and biological materials from exposure to infectious aerosols. They achieve this through carefully controlled airflow and High-Efficiency Particulate Air (HEPA) filtration, which removes 𝗮𝘁 𝗹𝗲𝗮𝘀𝘁 𝟵𝟵.𝟵𝟳% 𝗼𝗳 𝗽𝗮𝗿𝘁𝗶𝗰𝗹𝗲𝘀 𝗺𝗲𝗮𝘀𝘂𝗿𝗶𝗻𝗴 𝟬.𝟯 µ𝗺. BSCs are classified into Class I, Class II, and Class III, with each class providing a different level of protection and intended for specific laboratory applications.
𝗖𝗹𝗮𝘀𝘀 𝗜 𝗕𝗦𝗖𝘀 provide protection for laboratory personnel and the environment, but do not protect the biological specimen from contamination. Air is drawn into the cabinet, preventing aerosols from escaping, and is then HEPA-filtered before being exhausted. These cabinets are commonly used for low- to moderate-risk microbiological work (typically BSL-1 and BSL-2) where product sterility is not essential.
𝗖𝗹𝗮𝘀𝘀 𝗜𝗜 𝗕𝗦𝗖𝘀 are the most widely used cabinets in clinical, research, pharmaceutical, and biotechnology laboratories because they protect personnel, the product, and the environment simultaneously. They use a combination of inward airflow, vertical HEPA-filtered laminar downflow, and HEPA-filtered exhaust.
Class II cabinets are further divided into 𝗧𝘆𝗽𝗲𝘀 𝗔𝟭, 𝗔𝟮, 𝗕𝟭, 𝗕𝟮, 𝗮𝗻𝗱 𝗖𝟭, each differing in airflow patterns and suitability for handling volatile chemicals or radionuclides.
Among these, Type A2 is the most common, featuring a minimum inflow velocity of 100 feet/min (0.51 m/s) and limited compatibility with trace amounts of volatile chemicals when properly ducted.
𝗖𝗹𝗮𝘀𝘀 𝗜𝗜𝗜 𝗕𝗦𝗖𝘀 provide the highest level of biological containment and are designed for work with highly infectious agents, including those handled in BSL-3 and BSL-4 laboratories. These gas-tight, negative-pressure cabinets are completely sealed, and all manipulations are performed through attached heavy-duty gloves. Both incoming and outgoing air pass through HEPA filtration, with exhaust air often undergoing double HEPA filtration or incineration before release. Class III cabinets are reserved for work involving dangerous pathogens that pose a high risk of aerosol transmission, ensuring maximum protection for personnel, the environment, and the material being handled.