Tecno System Srl

29/10/2026

⚡ TECNO SYSTEM – Extruders, extrusion lines and tooling

⚡ BEHIND EVERY PROJECT, THERE IS A TEAM.

An extrusion line is more than technology. It is the result of experience, collaboration and attention to every detail.

At Tecno System S.r.l. , our team follows each project throughout every key stage:

🔹 Engineering focused on the final product
🔹 Careful assembly of each unit
🔹 Integration of the complete extrusion line
🔹 Testing before delivery
🔹 Support during installation and start-up

Different , one shared goal: delivering a reliable solution tailored to the customer’s production requirements.

Because behind every reliable machine, there is a committed to making it perform at its best.

🌐 https://lnkd.in/edwg_Hp

01/10/2026

⚡ TECNO SYSTEM – Extruders, extrusion lines and tooling

🩺 PRECISION STARTS WITH A STABLE PULL.
In medical tubing extrusion, the haul-off is much more than a downstream unit. A stable and accurately controlled pulling process contributes directly to dimensional consistency, repeatability and product quality especially when processing small, delicate and high-precision tubing.

The Servo Haul-Off T500 MED is designed around the key requirements of modern medical extrusion:

⚙️ Servo motors for precise and responsive speed control
🎯 Stable & repeatable pulling for consistent processing conditions
🧪 Anti-crush system for gentle tube handling and consistent pulling.
↔️ Controlled and uniform gripping throughout the pulling process
🔹 Easy tube introduction for faster and simpler line setup
📏 Support system for in-line diameter control
🔄 Integration with extrusion line process control
🧼 Clean, stainless-steel design suitable for medical production environments
✅ FDA-compliant contact belts
👁️ Easy accessibility and clear product visibility for the operator

From micro-tubing to more complex medical applications, every component of the extrusion line plays a role in maintaining process stability.
Because consistent tubing starts with consistent pulling.

28/09/2026

Per ampliamento del nostro team, siamo alla ricerca di un Tecnico Elettromeccanico da inserire presso la nostra sede di Consandolo (FE).

La figura si occuperà principalmente di:

montaggio meccanico e cablaggio elettrico di macchinari e linee industriali
attività di montaggio e manutenzione elettromeccanica
ricerca guasti e diagnostica
avviamento e collaudo degli impianti
assistenza tecnica presso clienti, anche con trasferte in Italia e all’estero.

Requisiti preferenziali:

formazione tecnica in ambito elettrico, elettromeccanico
capacità di lettura degli schemi elettrici
lettura disegni e montaggi meccanici
esperienza su macchinari industriali
buona manualità e capacità di problem solving
disponibilità a trasferte
buona conoscenza della lingua inglese
​residenza o domicilio in zona o comuni limitrofi.

Cosa offriamo:

Inserimento diretto in azienda
Contratto e inquadramento commisurati all’esperienza e alle competenze maturate
RAL definita in base al profilo professionale del candidato
Formazione e affiancamento iniziale
Opportunità di crescita professionale e sviluppo di competenze tecniche specialistiche
Inserimento in una realtà dinamica e orientata ai mercati internazionali
Lavoro su progetti e macchinari industriali personalizzati, destinati a clienti in Italia e all’estero

Saranno valutati sia profili con esperienza sia candidati più giovani con formazione tecnica e forte interesse per il settore, da affiancare e formare internamente.

Per candidarsi scrivere a:
[email protected] allegando il proprio CV ed inserendo come oggetto mail candidatura elettromeccanico.

26/09/2026

TECNO SYSTEM – Extruders, extrusion lines and tooling

⚙️ Every extrusion project starts with a specific need.
Our job is to turn it into the right solution.

From the first idea to the final production line, at Tecno System we design and manufacture extrusion solutions tailored to each application.

🔹 Extruders & complete extrusion lines
🔹 Customized downstream equipment
🔹 Tooling and dedicated solutions
🔹 Process control & automation
🔹 In-house engineering and manufacturing

Because there is no such thing as a one-size-fits-all extrusion line.

🇮🇹 Italian engineering. Tailored to your needs.

📩 Have a new extrusion project in mind?
Let’s talk about it.

15/09/2026

TECNO SYSTEM – Extruders, extrusion lines and tooling

WHAT HAPPENS IN ONE SECOND OF EXTRUSION?

A tube or profile is moving through the line.

It looks simple. But in that single second, an entire process is working to keep it exactly as it should be.

🔹 Material is being fed, melted and homogenized.
🔹 Temperature, screw speed and pressure are interacting.
🔹 The melt is being shaped through the tooling while cooling stabilizes the geometry.
🔹 Dimensions are being measured and line speed is being synchronized.

⚙️ And everything has to work together.

Because producing the right dimension once is not the real challenge. The real challenge is maintaining it continuously.

Second after second. Meter after meter.

An extrusion line is not simply a sequence of machines. It is one integrated process, where every element influences the final result: stability, repeatability, quality and productivity.

🎯 Feed. Melt. Control. Shape. Cool. Measure. Synchronize. Repeat.

That’s what happens in one second of extrusion.

🔄 And then it happens again. And again. And again.

All of this is part of the Tecno System S.r.l. know-how: combining technology, process control and engineering expertise to turn extrusion into a stable, repeatable and reliable production process.

Tecno System S.r.l. - Extrusion Technology

03/09/2026

⚡ TECNO SYSTEM – Extruders, extrusion lines and tooling

🔬 One medical extrusion concept. Different sizes for different applications.
The Tecno System MED Series is a range of extruders specifically developed for medical tubing and high-precision micro-extrusion applications.

⚙️ The series starts from 12 mm screw diameter, designed for the most demanding micro-tubing applications, and includes different extruder sizes according to the required output, material and final product.
The TM 30 MED, equipped with a 30 mm screw, is one of the configurations within the range, combining compact dimensions with the process control required by the medical industry.

✨ Key features of the MED Series:
• Full stainless-steel construction
• High-precision brushless drive
• PID multi-zone temperature control
• Temperature-controlled cooled feed throat
• Precise screw speed control
• Stable and repeatable processing conditions
• Hygienic, easy-to-clean design
• Compact configuration for medical extrusion lines

🧪 From micro-tubing to larger medical tubing applications, the MED Series can be configured around the specific requirements of each extrusion process.
MED Series – Precision extrusion technology for medical applications.

06/08/2026

⚡ TECNO SYSTEM – Extruders, extrusion lines and tooling

🔧 in the 1970s. Ready for a new chapter.

This vintage extruder is a powerful reminder that solid engineering can stand the test of time.
Behind every machine there is a story made of experience, reliability and continuous evolution. Now, after decades of service, this extruder is ready to begin a new chapter ⚙️
A true example of how the past can become the foundation for the future.

☀️ Summer closure:
Tecno System S.r.l. will be closed from 10 to 23 August 2026.
We will be back on 24 August, ready for new projects and new challenges.
Happy summer holidays from the entire Tecno System team! 🌊

13/07/2026

⚡ TECNO SYSTEM – Extruders, extrusion lines and tooling

🚚 Ready to ship our extrusion lines before the summer break! ☀️
Even during these final weeks before the holidays, our production and logistics teams are working hard to complete the last preparations and organise the shipment of our lines to customers. ⚙️📦

We would like to thank everyone who has chosen Tecno System and continues to rely on our experience, technology and tailor-made solutions.
Your trust and the cooperation developed project after project constantly motivate us to improve and deliver increasingly efficient and customised extrusion solutions.
We wish all our customers, partners and collaborators a pleasant summer break and a wonderful holiday! 🌊☀️

📅 Tecno System will be closed from 10 to 21 August.
🔄 Our normal activities will restart on Monday, 24 August.

08/06/2026

⚡ TECNO SYSTEM – Extruders, extrusion lines and tooling

🚀 SEE YOU AT PLAST Milan 2026!

Join us in Milan and discover how Tecno System transforms ideas into high-performance extrusion solutions.

🤝 MEET OUR TEAM

👔 Marco Rubbi ✈️🌍🛩 Sales Director

🔹 Erik Milani Junior Sales Account

🌍 Pascal Thomas France & Belgium Sales Representative

📍 Hall 13 | Booth J14

💬 Let’s talk about your next extrusion project.
☕ Stop by our stand for a coffee and a chat with our team.

We look forward to welcoming you!

14/05/2026

TECNO SYSTEM – Extruders, extrusion lines and tooling

🔬 Not every medical tube is designed to stay constant. Some applications require the opposite: controlled variation, precise transitions, and geometry that changes exactly where and how it should.
That is where taper tubing and bump tubing become critical.

⚙️ At Tecno System S.r.l., we develop medical extrusion lines engineered to manage these demanding geometries with stability, repeatability, and precise dimensional control by Zumbach Electronic.

🎥 The video below shows one of our medical micro extrusion lines producing precision taper/bump tubing with smooth and controlled diameter transitions.

What makes this process particularly demanding is the need to maintain:
✔️ Dimensional consistency throughout the profile
✔️ Stable material distribution
✔️ Accurate transition control by Zumbach Electronic bump software
✔️ Repeatable process parameters
✔️ Continuous production reliability.

📈 For medical manufacturers, this means greater confidence during downstream processing and better performance in the final device.

🧪 Our extrusion solutions are developed for a wide range of medical-grade technopolymers and can be fully customized according to product geometry, process requirements, and application targets.
In medical extrusion, precision is not only about reaching a dimension.
It is about controlling the entire transition.

https://lnkd.in/d6b_V7Vu

This link will take you to a page that’s not on LinkedIn