Quali sono gli orari di apertura?

Lunedì 08:00 - 12:30 13:30 - 17:00 Martedì 08:00 - 12:30 13:30 - 17:00 Mercoledì 08:00 - 12:30 13:30 - 17:00 Giovedì 08:00 - 12:30 13:30 - 17:00 Venerdì 08:00 - 12:30 13:30 - 17:00

G.COMM Srl

Indicazioni Sito Web Contatta lo studio

quality lighting solution for dental/medical professionals, made in Italy.

22/10/2026

How important is the shadowless effect in surgical lighting?

During a dental procedure, the working field is constantly changing. Hands, instruments, and team movements can partially obstruct the light beam, creating shadows precisely in the areas where clear visibility is essential.

That’s why evaluating an operating light based on light intensity alone is not enough.

Another key factor is the system’s ability to distribute light and minimize the formation of shadows, even when obstacles are present.

This is the principle behind the shadowless effect.

In Polaris, the specific geometry of the 10 LED reflectors allows 100 individual light fields to overlap, designed to keep the operating field illuminated even when part of the light is blocked.

A solution developed to meet the practical demands of everyday clinical work.

15/10/2026

A strong partnership goes beyond simply distributing a product.

That’s why G.COMM supports its distributors through a partnership model designed to help them develop their markets: products designed and manufactured in Italy, technical and commercial support, and dedicated marketing materials.

In this carousel, we’ve highlighted some of the key elements of our collaboration with our partners.

If you operate in the dental industry and would like to learn more about G.COMM distribution opportunities, get in touch with us.

📩 [email protected]
🌐 www.gcomm-online.com

08/10/2026

👁️ Happy World Sight Day!
In dentistry, your eyes are on the job before your hands even move. They're focused on the tiniest details for hours, and they're the tool we forget about the most.

Good lighting, a comfy setup, a tidy workstation: looking after your eyes is part of looking after your work.

G.COMM, the company that loves your eyes 🧡

Be honest: when was the last time you had your eyes checked? 👇

24/09/2026

That’s a wrap on Warsaw Dental Medica Show 2026! 🇵🇱

We were delighted to join our local distributor, Makromed, as their guest at their stand for three days of meetings, conversations and valuable exchanges with dental professionals and partners.

It was a great opportunity to present G.COMM solutions for dental lighting and clinical video documentation, connect with the local dental community and gather valuable feedback directly from the field.

A big thank you to everyone who stopped by, shared their thoughts, asked questions and took the time to discover our solutions.

And a special thank you to Makromed for welcoming us to their stand and for sharing these three days with us. It was a real pleasure to be there together.

See you at the next event! 👋

17/09/2026

Warsaw Dental Medical Show 2026 | Warsaw

From September 17 to 19, we will be at Warsaw Dental Medica Show together with our partner Makromed.

📍 Ptak EXPO Warsaw – Booth F2.35

If you’re in Warsaw, come and visit us.

08/09/2026

Every dental practice has different needs, but certain aspects remain essential in all clinical activities:

- visibility of the operating field;
- ergonomics;
- safety and procedural control.

For this reason, G.COMM develops solutions designed to support dentists in their daily work: from the Nuvolina Composafe, Polaris Composafe and Zero4 Compact operating light systems to 4K clinical documentation with Iris View; from training-focused configurations with Imparo dental simultor to dental unit waterline sanitation with R45.

Different technologies, designed with one shared goal: to make chairside work more precise, efficient and safe.

Swipe through the carousel and discover G.COMM solutions.

11/08/2026

0.1 microns.

This is the microfiltration rating of the Easy Pure membrane, an anti-Legionella filter developed to help control the water supplied to dental units.

Narrow tubing, water stagnation and intermittent flow can create conditions that promote microbiological contamination and biofilm formation within dental unit waterlines.

For this reason, water management does not concern only what is delivered through the instruments, but the entire route the water follows inside the dental unit.

Easy Pure works through a microfiltration membrane, adding a physical barrier to the water supply system before delivery.

Key features:

• 0.1-micron microfiltration membrane
• suitable for installation on all dental units
• approximate capacity of 5,000 litres
• replacement required at least once a year
• system consisting of a pre-filter, an anti-Legionella filter and a connector with seals

A simple device with a specific purpose: adding an additional level of protection to the daily management of dental unit water.

Because microbiological control does not depend on a single measure, but on the integration of waterline treatment, maintenance and physical filtration barriers.

06/08/2026

In a previous post, we highlighted an important finding: according to a meta-analysis published in BMC Oral Health, 77% of the samples analysed from dental unit waterlines exceeded the bacterial limits recommended by the CDC.

This finding shows that dental unit water management is not a secondary concern, but an integral part of microbiological control within the dental practice.

Narrow tubing, low flow rates and periods of stagnation can promote the formation of biofilm on the internal surfaces of the water circuits, making a specific and consistent sanitation protocol essential.

R45 was developed for the treatment of dental unit waterlines, acting precisely where daily control is most difficult: inside the water circuits.

Key features:

• Class IIb medical device
• Certified bactericidal, mycobactericidal, fungicidal and virucidal activity
• Free-radical mechanism of action for effective biofilm removal
• Sterilises, breaks down and cleans in a single 60-second treatment

The microbiological quality of dental unit water depends not only on the water delivered at the outlet, but also on the consistent management of the entire water circuit.

25/07/2026

Before reaching a dental practice, every device goes through multiple stages of processing, assembly and quality control.

Each step is different.

Some require technical precision.
Others rely on manual skills and experience.
Some take only a few minutes, yet directly affect the final result.

With this content, we take you inside G.COMM’s production process, where every component is manufactured, inspected and assembled before becoming part of a complete device.

This is also how our Made in Italy quality takes shape: not only in the finished product, but in the care and attention dedicated to every stage of the process.

Because quality does not begin with the final inspection.

It is built long before that, one detail at a time.

16/07/2026

Before illuminating the operating field in a dental practice, a light must pass a fundamental inspection: the assessment of its illumination performance.

In the case of Polaris, this does not simply mean checking that the light switches on or that its output is sufficiently powerful.

The quality of illumination depends on something far more precise: the way the light beams converge, overlap and create a uniform working field.

During this stage, particular attention is paid to how the light performs:

* The beam must be correctly centred;
* Light distribution must be consistent;
* The light sources must work together;
* Shadows must be minimised;
* The illuminated field must meet the professional’s expectations during daily use.

Because a dental operating light must provide visibility, working comfort and precise control over every detail.

It represents the connection between what the device promises and the performance it delivers in the clinical field.

This inspection takes place before the light leaves production, when Polaris is no longer assessed as a collection of individual components, but as a complete optical system.

This is where every LED, every reflection and every geometric element must contribute to the same result: stable, uniform and functional illumination.

Indirizzo

Via XXV Aprile, 20
Cornate D'Adda
20884

Orario di apertura

Lunedì	08:00 - 12:30
	13:30 - 17:00
Martedì	08:00 - 12:30
	13:30 - 17:00
Mercoledì	08:00 - 12:30
	13:30 - 17:00
Giovedì	08:00 - 12:30
	13:30 - 17:00
Venerdì	08:00 - 12:30
	13:30 - 17:00

Sito Web

http://www.gcomm-online.com/

Notifiche

Lascia la tua email e sarai tra i primi a sapere quando G.COMM Srl pubblica novità e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.