24/08/2026
【実機を使った初めての滅菌研修 Learning Sterilization Through Hands-On Training: Our First Autoclave-Based Training】
8月21日(金)、日本赤十字愛知医療センター名古屋第二病院の災害管理等の一部をお借りして(ありがとうございます!)、ヘルステクニカル(滅菌管理)研修を実施しました。
90Lのオートクレーブを、研修の参加者が実際に操作する初めての実践的な研修でした。病院では、滅菌は外部業者に委託していることが増えてきていますので、看護師などの医療従事者が直接かかわることが激減しています。しかし、フィールドでは、自分たちで実施しないといけないため、器機の消毒、洗浄、点検、パッキング、そして滅菌までの一連の流れや注意点を理解しておかなければなりません。
通常、90Lのオートクレーブは3時間程度で一連の滅菌プロセスが完了しますが、1気圧で100℃になるまで水を沸かす段階で70分程度かかってしまうなど、予定通りにはいきませんでした。研修自体は、参加者の方々に内容などは比較的満足していただけたようですが、スケジュールを含めプログラムは再検討の余地が大いにありました。
来年度は、今年度の反省を活かして、より効果的に、また参加者の方に楽しんでもらえるような研修にしたいと思います。
#滅菌管理 #滅菌 #国際救援 #国際医療協力 #国際要員 #日本赤十字社 #大阪赤十字病院
On Friday, August 21, we conducted a Health Technical Training session on sterilization management, using part of the disaster management facilities at the Japanese Red Cross Aichi Medical Center Nagoya Daini Hospital.
This was our first training session in which participants had the opportunity to actually operate a 90-liter autoclave. In hospitals, sterilization services are increasingly outsourced to external providers, meaning that nurses and other healthcare professionals have fewer opportunities to be directly involved in the sterilization process. In the field, however, healthcare workers may need to carry out sterilization themselves. It is therefore essential for them to understand the entire process, from disinfection, cleaning, inspection, to packing and sterilization, as well as the key points to consider at each step.
A 90-liter autoclave normally takes approximately three hours to complete the entire sterilization process. However, the actual process did not proceed as expected. For example, it took approximately 70 minutes just to heat the water and reach 100℃ at pressure of 1 atmosphere.
Overall, the participants appeared to be reasonably satisfied with the training content. At the same time, the experience revealed several areas for improvement, particularly in terms of scheduling and program design.
Next year, we hope to build on this year's experience and lessons learned to develop a more effective and engaging training program. By making better use of hands-on practice, we aim to provide participants with practical learning opportunities while making the training more enjoyable and rewarding.