Neirynck & Vogt N.V. - Lebanon

12/05/2025

Time to bring Z 4 - C&B Universal Investment to your lab? Let me know

1- CASTING
2- CAD / CAST
3- PRESSING
4- 3D PRINT

🌐 www.hachemline.com
📧 [email protected]
☎️ (01)684061 📱+961 3 924 158
*Hachem Line* – NV distributor in Lebanon

28/04/2025

N&V Tips
Helpful tips for pressable ceramics

Pressable ceramics have become a top choice of many clinicians because of their ability to create such esthetically pleasing restorations. With Universal Z4 Investment and Disposable Plungers being great choices for improving pressing results, we've had an opportunity to help many dental laboratories troubleshoot different types of problems.

Many of the newer all-ceramic materials can be tricky to use at first and users must often make adjustments to "dial in" their results. With that in mind we thought we would share a few of the problems and solutions we commonly see… Soon

🌐 www.hachemline.com
📧 [email protected]
☎️ (01)684061 📱+961 3 924 158
Hachem Line – NV distributor in Lebanon

25/03/2025

Time to bring Z4 Universal Investment to your lab?
Metal C&B Work casting done by one of our talented Lebanese Dental Technicians using Z4 Universal Investment!

🌐 www.hachemline.com
📧 [email protected]
☎️ (01)684061 📱+961 3 924 158
Hachem Line – NV distributor in Lebanon

19/03/2025

N&V Tips
Helpful tips for casting alloys

Question: After sandblasting, I have a couple of edgy rough spots on the casting

Answer: In this case it is perhaps not bad to have a look at your wax pattern under microscope before investing. Sometimes one is surprised to see how many dust particles are on the surface of the pattern. It may be gypsum dust, grains of sand blasting material or any other scrap sticking to the wax. By using Z4, a very fine flowing investment that reproduces every detail, the scrap will be perfectly cast and visible on the surface of the casting. Cleaning the wax before investing with dry air or water may be the solution here. Better still is to work in a clean environment for waxing up. Ideal is to not wax up on the same spot as where you finish the metal!

🌐 www.hachemline.com
📧 [email protected]
☎️ (01)684061 📱+961 3 924 158
Hachem Line – NV distributor in Lebanon

15/03/2025

Time to bring MG-Vest Investment to your lab?
Partial Denture casting done by one of our talented Lebanese Dental Technicians using MG-Vest!

🌐 www.hachemline.com
📧 [email protected]
☎️ (01)684061 📱+961 3 924 158
Hachem Line – NV distributor in Lebanon

13/03/2025

N&V Tips
Helpful tips for casting alloys

Question: The casting comes a bit rough out of the investment and I have a hard time sand blasting the metal

Answer: This is an indication of overheated metal. The metal may not be burned but it is overheated. The best way to check if the metal was cast at the right time is to just pass your finger over the button or cone of the casting. If the edge feels sharp, the metal was heated too much. The edge should be rounded as a clear indication of the right casting temperature. As a result of casting at the right temperature the castings will come clean of investment with just some oxidizing on the metal depending on the kind of metal used.

🌐 www.hachemline.com
📧 [email protected]
☎️ (01)684061 📱+961 3 924 158
Hachem Line – NV distributor in Lebanon

09/03/2025

🌐 www.hachemline.com
📧 [email protected]
☎️ (01)684061 📱+961 3 924 158
Hachem Line – NV distributor in Lebanon

Z4… Faster.. Much Faster

Z4… "Rapid Cast" Universal Investment can be placed into the preheating furnace after 30 minutes, 3 hours, 3 days, or 3 weeks later at any given temperature without the fear of inconsistent results or exploding cylinders!

🌐 www.hachemline.com
📧 [email protected]
☎️ (01)684061 📱+961 3 924 158
Hachem Line – NV distributor in Lebanon

19/02/2025

16/02/2025

08/08/2022

Z 4 - C&B Universal Investment
The good got even better

Now available in 2 packages:
- Eco Pack (24 sachets x 500 grams + 3 liters expansion liquid)
- Classical Pack (56 sachets x 160 grams + 2 liters expansion liquid )

🌐 www.hachemline.com
📧 [email protected]
☎️ (01)684061 📱+961 3 924 158
Hachem Line – NV distributor in Lebanon

12/05/2022

Z 4 - C&B Universal Investment

Awarded for Dental Innovation. Z4 is a carbon free, phosphate bonded investment for the whole specter of C & B work.
Z4 can be used for all dental alloys as well as for pressable ceramics.
The special features of Z4 can be summarized as follows :
- After mixing, the investment is very thin flowing. This consistency allows to work with little or no vibration at all when filling the cylinder.
- Z4 works great in „ringless „ procedure allowing a free expansion control.
- The shock heat qualities of Z4 are such that they can be put in effect at every given time, meaning the cylinder can be put at end temperature up to 900° C ( 1650°F ).
- in the furnace from 30 minutes after pouring till hours after pouring.
- This allows an optimal work planning in the lab and a possibility of productivity increase without stress.
- The devesting of the Z4 after casting is extremely easy.
- Castings are very smooth.
- Z4 is universal meaning it works for all dental alloys and also for pressable ceramics

🌐 www.hachemline.com
📧 [email protected]
☎️ (01)684061 📱+961 3 924 158
Hachem Line – NV distributor in Lebanon

10/05/2022

MG-Vest - Partial Investment

Awarded for Dental Innovation in Pioneering rapid - cast partials. MG-Vest Partial Denture Investment offers dental laboratories a rapid cast investment that is capable of producing precision metal frameworks.

MG-Vest is a phosphate bonded investment that requires only one safe, water based liquid to control the expansion of the ring and the fit of the metal framework.
With the high speed casting capabilities found in MG-Vest dental laboratories can produce metal frameworks in under two hours, while increasing productivity and profitability.

- High speed partial denture investment
- Use with any system, including light cured or resin patterns
- Precise, smooth and consistent results
- Requires less preparation and finishing time
- Easy to devest, with reduced finishing time required

🌐 www.hachemline.com
📧 [email protected]
☎️ (01)684061 📱+961 3 924 158
Hachem Line – NV distributor in Lebanon