08/13/2026
EN 61340-5-1 is the international benchmark for ESD protective clothing. Most lab coats don't meet it.
Ours does.
Our Anti-Static Lab Coat uses a 65/34/1 polyester-cotton-conductive blend — conductive fibers woven throughout the fabric, not just coated on. That's the difference between a coat that stays ESD-safe wash after wash and one that loses its protection the third time through the laundry.
Three tool pockets. Concealed stud closure. No exposed metal. Machine washable at 60°C. Sizes XS–5X.
If your team is in cleanrooms, electronics assembly, or PCB handling — this is the coat your safety audit expects.
Full specs at asasupplies.com — link in bio.
13)
Two surveyors on the same job. Same road. Same risk.
One is wearing a standard Class 2 vest. One is wearing a contrasting reflective vest with two-tone tape.
At dusk, with headlights at 500 feet — which one do you see first?
Daytime contrast matters just as much as nighttime reflectivity. That's the whole point of two-tone tape — it doesn't disappear when the sun's still up.
Our Class 2 Surveyor Vest is ANSI/ISEA 107-2015 Type R certified, with two-tone reflective tape, 6 pockets, zipper front, and sizes up to 4XL.
Lime or orange — your crew, your call.
https://www.asasupplies.com/anti-static-esd-lab-coat