Wham Bam Systems

10/26/2026

We went GIGA for the Halloween finale! 💀🎃

From a little monitor buddy to a 40-inch skeleton... we saved the biggest for last!
For part 3 of our Make Something Spooky series, we printed this articulated skeleton on an ELEGOO OrangeStorm Giga using Wham Bam Powder Painted ULTEM PEI plates and SUNLU PLA Plus, then welded the printed sections together with 3D Gloop!
Big print. A little flex. One very spooky new colleague. 👻

Model credit: Cute Flexi Print-in-Place Skeleton by FlexiFactory on Cults3D.
Now show us YOUR Halloween makes! There is still time to enter our contest:

🎃 Make a Halloween project using Wham Bam products.
📸 Post photos or a video showing the Wham Bam products you used AND your finished creation.
🏷️ Tag and include .

The most exciting post wins a $100 gift card! Entries close October 31, 2026.
Which of our three Halloween makes was your favorite? And what would YOU print this big?

10/22/2026

3D Printing a Spooky Skull 💀 | Wham Bam Halloween 2/3

Our colleagues are in for a fright! 💀

For week 2 of our “Make Something Spooky” series, we’re printing a spooky skull in PLA on Wham Bam’s PEX build surface to scare a few of our Wham Bam colleagues. A skull is creepy enough... but those eyes! 👀

Want to print your own? Get the Peak-a-Boo Skull model on MakerWorld(https://makerworld.com/en/models/3437271-peek-a-boo-skull-kinetic-pop-out-eyes-skull -3919489).
Making something spooky yourself? Enter our Halloween contest for a chance to win a $100 gift card! 🎃

To enter:
Make a Halloween project using Wham Bam products.
Post photos or a video on social media showing the Wham Bam products you used AND your finished creation.

Tag and include .

We’ll choose the most exciting post to win! Entries are open through October 31, 2026.
Watch our “Make Something Spooky” playlist and subscribe for the final Halloween make!

10/16/2026

Your turn: show us something spooky! 👻
We want to see what YOU are making so much that we’re hosting another Halloween contest!
Creepy decorations, costume props, tiny monsters - whatever you’re bringing to life, show us how Wham Bam is part of your Halloween making.

How to enter:

- Make a Halloween project using Wham Bam products.
- Post photos or a video on social media showing the Wham Bam products you used AND your finished results.
- Tag and include .

We’ll choose the most exciting post to win a $100 gift card! 🏆
Show us your process, your creativity, and the big reveal. We can’t wait to see what you make!

Contest runs October 14–31, 2026.

Happy Halloween making!

10/16/2026

You can still save on ULTIM8™ JIG for Morpho!

Our Early Bird reservation offer is now open, giving you 15% off our Morpho kits and accessories. The offer continues until December.

Reserve with a $10 fully refundable deposit, credited toward your purchase.
We’re working with Morpho to finalize tooling and product compatibility.
Full kit options, contents, and available accessories are expected on our website in 2-3 weeks, when deposit holders will be able to convert their reservations into orders.

Already reserved during Super Early Bird? Your 20% discount and place in line remain secured.

👉 https://www.whambamsystems.com/pages/ultim8-jig-morpho

Wham Bam is dedicated to making 3d printing easy, fun, and productive.

10/16/2026

Your monitor deserves a Halloween costume, too! 💀

We’re making a Hanging Skeleton Buddy on a Bambu X2D using our Wham Bam Carbon Fiber Plate. It’s the first of three fun Halloween Shorts showing what we’ve been creating!

Print your own Hanging Skeleton Buddy - get the model on MakerWorld:
https://makerworld.com/en/models/3392353-hanging-skeleton-buddy -3861213

Find our “Make Something Spooky” playlist on our channel, and subscribe for the next two videos.

Making something spooky yourself? Enter our Halloween contest October 16-31, 2026!

Post photos or a video on social media showing the Wham Bam products you used AND your finished Halloween creation. Tag and include .
The most exciting post wins a $100 gift card! 🎃

Made by and starring Camila from the Wham Bam technical team. 🎃

10/15/2026

LAST CHANCE: Morpho Super Early Bird ends tonight!

Reserve your ULTIM8™ JIG for Morpho before midnight tonight, October 15th, to secure 20% off our full Morpho line of kits and accessories.

Your $10 deposit is fully refundable and will be credited toward your purchase. This offer is for Morpho Kickstarter and Super Early Bird backers.

Tomorrow, the reservation discount changes to 15%reserve today to lock in the bigger savings!

👉 https://www.whambamsystems.com/pages/ultim8-jig-morpho

10/05/2026

🚨 ATTENTION xTool USERS!
The ULTIM8™ JIG for Laser Engravers is HERE. 🔥

Designed for faster setups, consistent positioning, and repeatable engraving jobs - so you can spend less time aligning and more time creating.

👉 Available now at whambamsystems.com

10/02/2026

GWEIKE, meet ULTIM8™ JIG. 🔥

The ULTIM8™ JIG for Laser Engravers is now available for the full Gweike G2 Series - built to make positioning, repeat jobs, and production setups faster and more consistent.

Set it once. Repeat with confidence.

👉 Available now at www.whambamsystems.com/pages/ultim8-lasers

09/29/2026

The ULTIM8™ JIG is expanding. 🔥
Already trusted for UV printing workflows, ULTIM8™ JIG is now available for laser engravers - bringing the same focus on positioning, repeatability, and easier setup to your laser workflow.

Compatible with:

• xTool F1 / F2
• xTool F2 Ultra / F2 Ultra UV
• Gweike G2 Series

Make repeat jobs faster, cleaner, and easier to set up.

👉 Available now at Wham Bam Systems.

ULTIM8™ JIGfor Laser Engravers Position accurately. Hold securely. Repeat confidently. The machine-specific silicone mat and modular fixtures hold every part in the same position, engraving after engraving. Available for these machines: xTool F1 / F2 xTool F2 Ultra / F2 Ultra UV Gweike G2 Series R...

09/25/2026

We're bringing the heat to Printopia! 🔥

Visit Wham Bam Systems at BOOTH #2 and score 20% OFF OUR ENTIRE SITE! 🧡

Come meet the team, check out our products, and take advantage of this exclusive event offer!

📍 Printopia | Booth #2