Denteon

Denteon Denteon offers tailored problem-solving solutions for dental labs, enhancing asset value and production efficiency.

Our services include customized R&D, Roland Mill Repair, and production optimization, backed by a seasoned team for a competitive edge.

Throwback to 2023...A room full of machines, a growing vision, and Greg right in the middle of it all.Looking back at th...
09/15/2026

Throwback to 2023...

A room full of machines, a growing vision, and Greg right in the middle of it all.

Looking back at this photo, we’re reminded that Denteon wasn’t built overnight. It was built one machine, one lab, one conversation, and one customer at a time.

Three years later, the mission is still the same:
Help dental labs make better use of their technology and help the people behind it succeed.

Here’s to how far we’ve come and to everything still ahead 🥂

09/08/2026

Having trouble with the disc changer on your Roland 52DC?

In this clip from the latest Denteon AMA, Greg talked through a couple of DIY adjustments that can help get your disc changer working properly again.

Real-world troubleshooting from someone who knows these machines inside and out 🛠️

Want more practical milling tips?

Join the Denteon community and catch the next AMA.
🔗 - https://t.ly/denteon-tech-hub

09/01/2026

Got T-axis errors? Denteon fixes disc changer issues!

One of the most difficult repairs to get right, Denteon has it figured out. We specialize in repairing Roland DGSHAPE disc changers!

This 52 series mill is now back up and running after an overnight test with zero errors. 💪

🔗 Need help with your DGSHAPE mill?

Contact Denteon: https://t.ly/contact-denteon

08/25/2026

Machine rigidity matters.

Less rigidity = more vibration = marks in your surface finish.

Every vibration the cutting tool experiences has an impact on the quality of the final restoration. That's why a rigid milling machine is the foundation of accurate, consistent milling.

Need help getting better milling results? Contact Denteon.
🔗 - https://t.ly/contact-denteon

Stop guessing when milling problems happen.We’re one month away from the 1-Day Milling Machine & CAM Masterclass!Join Gr...
08/18/2026

Stop guessing when milling problems happen.

We’re one month away from the 1-Day Milling Machine & CAM Masterclass!

Join Greg Everett and Michael Webb on September 18 in Murrieta, CA for hands-on training focused on diagnosing milling problems, improving CAM strategies, and learning the skills to become more self-sufficient in the lab.

📍 Denteon Headquarters – Murrieta, CA
📅 September 18, 2026

Reserve your spot today!
🔗 - https://t.ly/Machine&CAMmasterclass

08/11/2026

The most successful labs don't depend on outside help—they build the knowledge to solve challenges themselves.

At Denteon, we help labs become more self-sufficient.

From CAM strategies to machine optimization and troubleshooting, we equip labs with the tools they need to take control of their production.

Looking to learn how to become self-sufficient? 🚀

Join us September 18 in Murrieta, CA for our 1-Day Denteon Milling Machine & CAM Masterclass!

🔗 Register today: https://t.ly/Machine&CAMmasterclass

08/04/2026

🎯 Is your machine calibrated?

In this clip from our latest AMA, Greg talks about MillBox's built-in calibration tool which identifies your machine's current zero point and ensures your CAM software and milling machine are perfectly in sync.

But here's the key: this tool works with your machine calibration—not instead of it.

If your mill is mechanically out of calibration, using the calibration tool alone may compensate temporarily, but it won't correct the underlying issue. Over time, those inaccuracies can continue to grow.

For the best milling results:

✅ Perform your machine's recommended calibration.

✅ Then use the MillBox calibration tool to synchronize the machine and CAM to the same zero point for maximum accuracy.

Need help getting everything dialed in? We're here to help.

🔗- https://t.ly/contact-denteon

07/28/2026

🦷 When milling zirconia, surface speed matters.

Run too fast, and you can introduce vibration that shows up in the surface finish of your restoration. That's because zirconia behaves differently than materials like plastic or metal—it performs best with the right combination of feed rate and RPM.

Taking the time to dial in your milling parameters can mean smoother surfaces, better results, and more consistent parts ✨

Need help dialing in your milling parameters? ✋

Contact Denteon – https://t.ly/contact-denteon

07/21/2026

Meet Greg Everett 👋

He didn't start in digital dentistry as an expert.
He started by sweeping floors 🧹

Years later, after working with dental labs, solving production challenges, and helping labs embrace digital workflows, Greg founded Denteon with one goal: help labs succeed.

Need help improving your lab's production?

Connect with Greg:
🔗 - https://t.ly/contact-denteon

07/16/2026

🎤 Another AMA with Greg is coming up this Friday!

Here's a quick clip from our last live AMA, where Greg answered questions from the community and shared real-world tips for getting better milling results.

Have questions about your milling machine, CAM strategies, tooling, or troubleshooting? Bring them to tomorrow's live AMA and get answers directly from Greg.

🗓️ Friday, July 17
🕛 12:00 PM PST

👉Join Here - https://t.ly/denteon-tech-hub

See you there!

Address

38415 Innovation Court Suite C
Murrieta, CA
92563

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+19517495435

Website

Alerts

Be the first to know and let us send you an email when Denteon posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Practice

Send a message to Denteon:

Shortcuts

Share

Category