What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

Mould Avoidance Consultancy

Home
Australia
Virginia, NT
Mould Avoidance Consultancy

Call Directions Website Contact the practice

Mould Avoidance Consultancy specialises in expert advice, testing and 1-1 services for CIRS, Immune Compromised and Chronic Illness Sufferers.

29/10/2026

That cheap ceiling fan that came with the house likely isn’t doing the job. Your exhaust needs to be properly ducted to the outside to remove moisture from your home AND needs to have a high extraction capacity.

🚿 Five people showering every day = A LOT of moisture!

Get your bathroom, kitchen and laundry ventilation wrong, and you’re creating the perfect conditions for mould to grow.

Stop the moisture before it becomes a mould problem!

26/10/2026

We’re installing a stack of these NWT air purifiers throughout a home in Queensland, and they’re a fantastic budget-friendly alternative to the expensive brands!

✅ HEPA filtration rated at 99.97% 💰 Replacement filters just $25 delivered!

I’ll be sharing particle count results soon to show you how well they actually perform. As always, I only recommend products I use myself!

Use code MOLDCONSULTANCY20 for our trade discount on NWT air purifiers and dehumidifiers.

20/10/2026

This 33,000-litre stormwater tank couldn’t drain fast enough. Water backed up the downpipes, broke the pipes and leaked into the walls of the home.

Meanwhile, the client kept getting sicker and sicker, with no idea what was causing it. 😔
Before we could even think about remediation, we had to find the source. And what we uncovered was a stormwater system that had been failing for YEARS.

We’ve now installed a massive pump and new plumbing to finally get the water flowing out properly.

THIS is why you investigate before you remediate. You can remove mould and repair damage, but if you don’t fix the source of the moisture, you’re not solving the problem.

12/10/2026

Quick mould prevention hack: Run your ceiling fan on LOW 24/7 to keep air circulating and reduce stagnant air around your home instead of opening the windows.

🌬️ Costs nothing to run, could help prevent mould-prone dead spots, and takes zero effort!

06/10/2026

Weeds growing in your foundation? Does it mean the slab is wet?
Not necessarily. This is residual growth from when groundwater was high.
I moisture-tested the slab and surrounding areas, and it’s completely dry.
Growth doesn’t always mean there’s a current moisture problem.

29/09/2026

Your dehumidifier could be spreading what it’s supposed to remove.

Having used the new NWT dehumidifiers for a while now, I am VERY impressed. So we’ve now added a complete, step-by-step breakdown and deep-clean of the NWT to the course, alongside Ionmax & AusClimate.

Dehumidifiers can harbour mould and microbial growth inside the unit, which is why we show you how to fully break it down, clean it properly, then apply ACX to interrupt the mould growth cycle and help prevent fungal hyphae from developing.

🔥 20% OFF, with ACX + the course (includes all models).

15/09/2026

Have you siliconed THESE spots? 👀

If not, grab a bottle and check your bathroom.
Around the bath. Under the vanity top. Around the basin. And especially where water can sneak underneath things.

You’re not just sealing a gap. You’re stopping water from getting into places you can’t see.

Save this one for your next bathroom check. 👀

07/09/2026

Finally, a way to treat mouldy car air conditioning.
This has been one of my most asked questions…
“But what do I do about my car?”

Finally, after trialling so many products and avenues for application, I’ve finally (and successfully) found way to treat vehicle air conditioning with ACX!

I’ve put the entire process into a step-by-step course alongside ACX so you can do it yourself.

👉 DM MOULD and I’ll send you the link.

03/09/2026

The new kid on the block 👀
Great price point, and it has all the features I look for in a dehumidifier. But time will tell…

I’m applying ACX and putting it to the test, so stay tuned for the update! NWT Australia

20/08/2026

This is why we use ACX on exhaust fans. 👀

This bathroom had fans venting into the roof cavity, creating the perfect environment for moisture and mould.
After upgrading the fans and venting them properly outside, we coated the fan barrel, housing and ducting with ACX to help break the mould growth cycle.
As I’ve said before, ACX does NOT kill mould. And we don’t want it to. We remove mould.
When applied correctly, ACX helps interrupt the mould growth cycle, helping prevent mould from continuing to grow.

DM Mould for the link

Address

Virginia, NT

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm

Telephone

+431282942

Website

https://www.mouldconsultancy.com.au/

Alerts

Be the first to know and let us send you an email when Mould Avoidance Consultancy posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.